Danfrost Private Limited

Weight Holding Capacity (Kg)	20 - 40
Power (W)	120 W
Material	Stainless Steel
Voltage	220 V
Frequency	50 Hz

Construction :
18 gauge Type 304 stainless Steel swirl design bowl, 14 gauge Type 304 Stainless Steel bracket, and a vandal-resistant bottom plate provides a long lasting unit with added peace of mind.

Quality Control :
Both fountains are pre-built and fully water and pressure tested to ensure proper functionality.

Barrier-free :
Barrier-free capabilities combined with its ease of use allows for a number of installation location possibilities.

Mounting :
Heavy-duty galvanized steel mounting frame provides the sturdy hidden support needed for the 'Hi-Lo' configuration of this unit. Further convenience is given to the chiller with the integral fold-out shelf.

Hands-free Operation :
Electric sensor allows for operation simply by moving in front of fountain, eliminating the need for manual activation under a number of circumstances.

Bubbler Head :
Polished chrome-plated brass bubbler head with integral laminar flow prevents splashing while providing a superior flow pattern. The integral basin shank and inserted roll pin add vandal resistance strength. Shielded, angled streamopening provides a steady, sanitary source of drinking water at .45 gpm.

Push Button Valve :
The push-button activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar).

Mounting	Wall Mount (On-Wall)
Installation Location	Indoor
Voltage	115V
Frequency	60 Hz
Features	Energy Savings, Filtered
Dimensions	L18 x W18-5/8 x H20-5/8 Inch
Power	220 VOLTS 50/60hZ
Finishing	Platinum Vinyl
Bubbler Style	Double Bubbler
Chilling Capacity	8 GPH
Shipping Dimensions	L20-1/2 x W19-11/16 x H26-3/16 Inch
Shipping Weight	61 lbs

Compliance :

• ADA & ICC A117.1
• ASME A112.19.3/CSA B45.4
• Buy American Act
• CAN/CSA C22.2 No. 120
• NSF 372 (lead free)
• NSF 42
• NSF 53
• NSF 61
• UL 399

Color	Silver
Material	Stainless Steel
Coating	Polished Chrome-Plated
Construction	14 gauge Type 304 Stainless Steel
Voltage	220 V
Frequency	50 Hz

Minimum order quantity: 1 piece

We have emerged as the leading position in this domain for offering a wide array of Drinking Water Fountain to our valuable clients.

 

Features:

• Less maintenance

• Damage-resistant

• Smooth operation

• Sturdy design

• Easy to use

• Robust structure

 

Construction :
18 gauge Type 304 stainless Steel swirl design bowl, 14 gauge Type 304 Stainless Steel bracket, and a vandal-resistant bottom plate provides a long lasting unit with added peace of mind.

Quality Control :
Both fountains are pre-built and fully water and pressure tested to ensure proper functionality.

Barrier-free :
Barrier-free capabilities combined with its ease of use allows for a number of installation location possibilities.

Mounting :
Heavy-duty galvanized steel mounting frame provides the sturdy hidden support needed for the 'Hi-Lo' configuration of this unit. Further convenience is given to the chiller with the integral fold-out shelf.

Hands-free Operation :
Electric sensor allows for operation simply by moving in front of fountain, eliminating the need for manual activation under a number of circumstances.

Bubbler Head :
Polished chrome-plated brass bubbler head with integral laminar flow prevents splashing while providing a superior flow pattern. The integral basin shank and inserted roll pin add vandal resistance strength. Shielded, angled streamopening provides a steady, sanitary source of drinking water at .45 gpm.

Push Button Valve :
The push-button activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar).

Mounting	floor or wall
Material	Stainless Steel
Model Name/Number	Floor Standing
Warranty	2 Year
Power	220
Color	ss finish
Finishing	ss
Cooling Capacity	30 ltr per hour
Voltage	230 V
Frequency	50 Hz

Minimum order quantity: 1 Piece

Backed by well qualified and experienced team members, we are engaged in offering an exclusive range of Wall Mounted Drinking Water Fountain.

Features:

Long service life

Simple design

Enhanced durability

Different size

Sturdy construction

Solid performance

Material	Marble
Shape Type	Rectangular
Size (centimetre)	70x32x104 cm
Frequency (Hz)	50 Hz
Power (W)	1000W
Voltage	220 V

Construction :
18 gauge Type 304 stainless Steel swirl design bowl, 14 gauge Type 304 Stainless Steel bracket, and a vandal-resistant bottom plate provides a long lasting unit with added peace of mind.

Quality Control :
Both fountains are pre-built and fully water and pressure tested to ensure proper functionality.

Barrier-free :
Barrier-free capabilities combined with its ease of use allows for a number of installation location possibilities.

Mounting :
Heavy-duty galvanized steel mounting frame provides the sturdy hidden support needed for the 'Hi-Lo' configuration of this unit. Further convenience is given to the chiller with the integral fold-out shelf.

Hands-free Operation :
Electric sensor allows for operation simply by moving in front of fountain, eliminating the need for manual activation under a number of circumstances.

Bubbler Head :
Polished chrome-plated brass bubbler head with integral laminar flow prevents splashing while providing a superior flow pattern. The integral basin shank and inserted roll pin add vandal resistance strength. Shielded, angled streamopening provides a steady, sanitary source of drinking water at .45 gpm.

Push Button Valve :
The push-button activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar).

Brand	Any
Storage Capacity	Any
Cooling Capacity	Any
Number Of Taps	01-02
Color	Silver
Body Material	Stainless Steel
Country of Origin	Made in India

Minimum order quantity: 01 Piece

 we can provide CMC of drinking Water fountain  any brand and model only in 18000.00 per annum

Design Type	ss
Color	ss
Size	slim
Material	ss
Brand	danfrost
Weight	65kg
Country of Origin	Made in India

Backed by well qualified and experienced team members, we are engaged in offering an exclusive range of Wall Mounted Drinking Water Fountain.

Features:

Long service life

Simple design

Enhanced durability

Different size

Sturdy construction

Solid performance

Material	Stainless Steel
Dimension	467*x83x520 mm
Frequency	50/60 Hz
Capacity	More Than 25 Litres
Options	Cold Water
Voltage	220 V

Minimum order quantity: 1 Piece

Owing to the vast industry experience and in-depth knowledge of this domain, we are offering a huge collection of high-quality  Wall Mounted Drinking Water Fountain with Bottle Filler to our valued clients.

Features:

Fine working capacity

Less maintenance

Light-weight

Perfect size

Easy to use

Simple design

Salient Features:

Appealing wall mountable design

Double Purification by RO+UV with Mineral Controller

Secondary purification by UV after RO for enhanced water quality throughout service cycles

Retains essential natural minerals in water with Mineral Controller Valve

8 litres Storage tank with glowing water level indicator

UV fail alarm to indicate failure in UV system

Filter Change Alarm to indicate Filter replacement time

Fully automatic operation with auto-on/off

Tamper-proof RO Membrane fused inside membrane housing

Computer controlled operations for enhanced purity and long life

Built-in SMPS to operate within 100-300V AC/50 Hz

Suitable for water from all sources - taps, borewell and municipal supply

Technical Specification:

ModelWater FountainPurification CapacityUpto 50 LPH*Maximum Duty Cycle300 Ltrs/DayBody MaterialABS Food GradeMountingOn the WallDimensions (INCH)12 (L) x 18 (W) x 24 (H)Min. Inlet Water Pressure0.3 Kg/cm²Max. Inlet Water Pressure3 Kg/cm²Filter CartridgeSediment, Carbon Filter, UF and Post CarbonUV Lamp Wattage11 WRO MembraneThin Composite RO 1812-75 GPDStorage Capacity8 LitresWeight9 KgsBooster Pump Voltage48V DCPower Consumption60 WInput Voltage160-280V AC/50Hz

Power (W)	120 W
Dimension (mm)	70x32x104 cm
Material	Stone
Voltage	220 V
Frequency	60 Hz

Construction :
18 gauge Type 304 stainless Steel swirl design bowl, 14 gauge Type 304 Stainless Steel bracket, and a vandal-resistant bottom plate provides a long lasting unit with added peace of mind.

Quality Control :
Both fountains are pre-built and fully water and pressure tested to ensure proper functionality.

Barrier-free :
Barrier-free capabilities combined with its ease of use allows for a number of installation location possibilities.

Mounting :
Heavy-duty galvanized steel mounting frame provides the sturdy hidden support needed for the 'Hi-Lo' configuration of this unit. Further convenience is given to the chiller with the integral fold-out shelf.

Hands-free Operation :
Electric sensor allows for operation simply by moving in front of fountain, eliminating the need for manual activation under a number of circumstances.

Bubbler Head :
Polished chrome-plated brass bubbler head with integral laminar flow prevents splashing while providing a superior flow pattern. The integral basin shank and inserted roll pin add vandal resistance strength. Shielded, angled streamopening provides a steady, sanitary source of drinking water at .45 gpm.

Push Button Valve :
The push-button activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar).

Mounting	WALL
Material	SS
Warranty	1 YEAR
Power	NO
Color	SS
Finishing	SS
Weight	250 KG

We are one of the conspicuous names in the industry for offering an inclusive range of SS Drinking Water Fountain to our valuable customers at affordable rates.

Features:

Simple installation

Smooth finishing

Low maintenance

Sturdy design

Robust structure

Excellent strength

Description:

This cooler operates with light pressure applied to any of the 4 push pads. Water flow continues as long as pressure on a pad is maintained. The cabinet has a smooth front underside without sharp corners or exposed fastenings.

Delivers 36 liters per hour of chilled drinking water

Waterways are Lead-free in materials and construction

Stainless Steel top

Flexible bubbler guard

Heavy gauge galvanized steel frame

High-efficiency cooling tank and coil

Environmentally refrigerant R134A

Available in Stainless Steel and Sandstone finish

Accessories

Trim bezel to cover wall surface between unit and wall

Different Glass fillers to choose from

Material	SS
Warranty	1 year
Power	220 volts
Color	ss
Finishing	ss
Brand	Danfrost
Frequency	50-60 Hz
Fill Rate	1.1-1.5 GPM
Voltage	220-240 V

Minimum order quantity: 01 Piece

• Fully integrated bottle filling station paired with OVL-II™ architectural fountain.
• Touchless, sensor activation designed for easy use (bottle filler); easy-to-operate push-button activation (bubbler).
• Fill rate is 1.1 GPM.
• Visual filter monitor with LED filter status indicator for when filter change is necessary.
• The 3,000-gallon filter is certified to NSF 42 and 53 for lead, Class 1 particulate, chlorine, taste and odor reduction.
• Green Counter™ informs user of number of 20 oz. plastic water bottles saved from waste.
• Laminar flow provides clean fill with minimal splash.
• Silver ion antimicrobial protection on key plastic components to inhibit the growth of mold and mildew.
• Real drain system eliminates standing water.
• Rated for indoor use.

Design Type	SS Finish
Color	ss
Size	floor Standing
Material	ss
Thickness	.6mm
Type	water fountain
Weight	50 kg

Minimum order quantity: 01 Piece

Backed by well qualified and experienced team members, we are engaged in offering an exclusive range of Wall Mounted Drinking Water Fountain.

Features:

Long service life

Simple design

Enhanced durability

Different size

Sturdy construction

Solid performance

Usage/Application	DANFROST
Material	Brass
Style	Contemporary
Design	Modern
Color	SS
Coating	Nickel plating

Minimum order quantity: 10 Piece

Drinking water Faucet can use for drining poroose.

• Good performance : Press the water outlet, high-quality spring, excellent hand feeling, protect the visor, outdoor and indoor drinking water is safer, and the water outlet height can be adjusted freely.
• 4.Installation: Two installation methods of Kitchen water filter faucet for you to choose , We are equipped with G1/2" adapter thread, So Fits 1/2" or 1/4" Tubes Connector(Out screw). (Note:Package not include PE Pipe). The drinking fountain bubbler faucet can be used for Outdoor , direct drinking water purifier drinking station, school, park,Bathroom, Kitchen Sink and so on.

 

Material	ss
Power	any
Brand	any
Color	White
Warranty	01
Automation Grade	Semi-Automatic
Packaging Type	Box

Minimum order quantity: 10 Piece

spare parts of drinking water fountain 
Any Brand 
Any Model 

Voltage	220
Wilo Make Pump	1 HP
Single Phase	220 Volts
Suitable For	Pressure Boosting
Maintain Pressure	2-4 kg
Pressore Tank	20 ltr

Minimum order quantity: 05 Piece

We are one of the leading names in the industry for offering a wide array of HPN System to our clients at reasonable rates.

 

Features:

• Light in weight

• Perfect size

• Light weight

• Elevated service life

• Low maintenance

• Excellent strength

Usage/Application	water
Brand	any
Packaging Size	any
Color	Clear
Features	indian
Quantity Per Box	1
Start Date Month	new
Country of Origin	Made in India

Minimum order quantity: 02 Piece

we can take AMC of drinking Water fountain  any brand and model only in 18000.00 per annumSpecification/Additional Details

• Country of OriginMade in India
• BrandAny
• Storage CapacityAny
• Cooling CapacityAny
• Number Of Taps01-02
• ColorSilver